Full Auto Commercial RO Water Treatment Purifier System

1. The system employs a combined process of “pretreatment (quartz sand + activated carbon) + core filtration (RO reverse osmosis/ultrafiltration/nanofiltration) + post-treatment (EDI/UV disinfection)” to specifically remove suspended solids, heavy metals (lead, mercury, chromium), organic matter, bacteria, viruses, hardness ions (calcium, magnesium), and other impurities from raw water. The effluent quality meets the standards of GB/T 19923-2005 “Water Quality Standard for Industrial Use of Reclaimed Urban Wastewater” or customer-specified international standards (such as ASTM, ISO).

2. The core filtration components (such as the RO membrane) use imported high-quality materials (such as Dow and Hydranautics), achieving a desalination rate of ≥98% and a product water resistivity of 1-18 MΩ・cm (depending on process configuration), meeting the requirements for high-precision production water.

3. Low operating costs and outstanding cost-effectiveness for export customers: Optimized energy consumption design, with energy consumption per unit of produced water ≤0.8-1.2 kWh/ton, far lower than traditional water purification equipment, reducing customers’ electricity expenses in the long term; water resource recovery rate ≥75% (RO system), reducing raw water waste, especially suitable for export customers in water-scarce areas.

Long lifespan of vulnerable parts (RO membrane lifespan 2-3 years, pretreatment filter media 6-12 months), long maintenance cycle, and highly interchangeable parts, easily sourced globally, reducing customers’ later maintenance costs and downtime.

4. Intelligent operation and convenient maintenance: Equipped with a PLC control system and touch screen operation interface, supporting automatic start/stop, online water quality monitoring (conductivity, pH value), fault alarms (such as filter media clogging, membrane fouling), automatic flushing, etc., eliminating the need for 24-hour dedicated personnel, reducing labor costs.